Laminating plastic woven laminating plastic woven composite plastic woven bags (also known as) the product is a little different point in the process, following a brief laminating plastic woven products process.
Laminating plastic woven production process can be broadly divided into three major step: printing, cutting, sewing, bags. The steps and definitely above sequence, based on the equipment used, some non laminating plastic woven after cutting the first printing, and can also be cut after the first printing. Automatic cutting sewing continuously to complete the printing, cutting and sewing processes, but also can be made into valve bags, put bottom bags, the seam adhesive after Woven in bag making.
Laminating plastic woven bag making process indicators in the following areas:
A woven appearance tolerance dimensions existing woven national standard "GB/T8946-1998", the width of the error is ± 10mm, and the length slightly different: 15mm-10mm.
Woven pull-off force, the main seam bottom to the seam allowance to two places.
Third, cleanliness, layout positions of the other parts in the clarity of printing inks and printing accuracy. Printed bags to be clear, no ink stains, such as printing the content should be consistent and the initial samples and requirements.
, Suture stitch from the needle and suture off the needle, break imperfections requirements.
Above shall be without laminating plastic woven Production Profile.
Laminating plastic woven production process can be broadly divided into three major step: printing, cutting, sewing, bags. The steps and definitely above sequence, based on the equipment used, some non laminating plastic woven after cutting the first printing, and can also be cut after the first printing. Automatic cutting sewing continuously to complete the printing, cutting and sewing processes, but also can be made into valve bags, put bottom bags, the seam adhesive after Woven in bag making.
Laminating plastic woven bag making process indicators in the following areas:
A woven appearance tolerance dimensions existing woven national standard "GB/T8946-1998", the width of the error is ± 10mm, and the length slightly different: 15mm-10mm.
Woven pull-off force, the main seam bottom to the seam allowance to two places.
Third, cleanliness, layout positions of the other parts in the clarity of printing inks and printing accuracy. Printed bags to be clear, no ink stains, such as printing the content should be consistent and the initial samples and requirements.
, Suture stitch from the needle and suture off the needle, break imperfections requirements.
Above shall be without laminating plastic woven Production Profile.